{
  "revision": "0.0.11-dev",
  "part": {
    "manufacturer": "Keystone",
    "mpn": "5015",
    "lcsc": "C2906768",
    "footprint": "ShieldSigner:Keystone_5015",
    "assembly": "factory SMT",
    "source": "https://www.keyelco.com/product-pdf.cfm?p=1353"
  },
  "testpoints": [
    {
      "ref": "TP901",
      "label": "+5V",
      "net": "+5V",
      "xy": [
        105,
        120
      ],
      "layer": "F.Cu"
    },
    {
      "ref": "TP902",
      "label": "GND",
      "net": "GND",
      "xy": [
        112,
        120
      ],
      "layer": "F.Cu"
    },
    {
      "ref": "TP903",
      "label": "HOST3V3",
      "net": "+3.3V",
      "xy": [
        174,
        79.5
      ],
      "layer": "B.Cu"
    },
    {
      "ref": "TP904",
      "label": "GND",
      "net": "GND",
      "xy": [
        174,
        87
      ],
      "layer": "B.Cu"
    },
    {
      "ref": "TP905",
      "label": "LCD3V3",
      "net": "LCD_3V3",
      "xy": [
        108,
        59.5
      ],
      "layer": "B.Cu"
    },
    {
      "ref": "TP906",
      "label": "GND",
      "net": "GND",
      "xy": [
        114,
        59.5
      ],
      "layer": "B.Cu"
    },
    {
      "ref": "TP907",
      "label": "TX>SC",
      "net": "UART_TX",
      "xy": [
        120,
        59.5
      ],
      "layer": "B.Cu"
    },
    {
      "ref": "TP908",
      "label": "RX<SC",
      "net": "UART_RX",
      "xy": [
        126,
        59.5
      ],
      "layer": "B.Cu"
    }
  ],
  "bracketMounts": [
    {
      "ref": "H705",
      "xy": [
        78,
        65.679
      ],
      "drillMm": 2.7,
      "keepoutDiameterMm": 6,
      "fastener": "M2.5; head/washer OD <= 5 mm",
      "caseFrameMm": [
        -50,
        23.9
      ]
    },
    {
      "ref": "H706",
      "xy": [
        187,
        65.679
      ],
      "drillMm": 2.7,
      "keepoutDiameterMm": 6,
      "fastener": "M2.5; head/washer OD <= 5 mm",
      "caseFrameMm": [
        59,
        23.9
      ]
    },
    {
      "ref": "H707",
      "xy": [
        78,
        113.479
      ],
      "drillMm": 2.7,
      "keepoutDiameterMm": 6,
      "fastener": "M2.5; head/washer OD <= 5 mm",
      "caseFrameMm": [
        -50,
        -23.9
      ]
    },
    {
      "ref": "H708",
      "xy": [
        187,
        113.479
      ],
      "drillMm": 2.7,
      "keepoutDiameterMm": 6,
      "fastener": "M2.5; head/washer OD <= 5 mm",
      "caseFrameMm": [
        59,
        -23.9
      ]
    }
  ],
  "mountSpacingMm": [
    109,
    47.8
  ],
  "existingEnclosure": "Existing four LCD support holes unchanged; new mounts are for custom brackets, not new posts in the existing shell.",
  "caseCoordinateFrame": "X=PCB_X-128; Y=89.579-PCB_Y; Z=0 carrier front. Millimetres."
}