{
  "boardSha256": "2f949d76b53bf75e4b6f56e5e68623900b1f3e9c2403770409e647953aabc93d",
  "reviewed": "2026-11-09",
  "qualification": "0.0.11 service revision: exact retained footprint and original routing checks; corrected parts unchanged. New Keystone footprints are symmetric single-pad SMT lands. Supplier preview and final DFM are still required.",
  "corrections": {
    "J301": {
      "lcsc": "C5246813",
      "native": [
        46.51,
        8.99,
        180
      ],
      "delta": [
        0,
        0.84,
        180
      ],
      "expected": [
        46.51,
        9.83,
        0
      ],
      "basis": "GCT manufacturer stake pattern and JLC catalog a636b18807724d12b57aad37ab127677 shell-slot centers; preview confirms outward cable mouth, four stakes and solder-tail overlap. Use mechanical stakes as datum, not catalog copper-pad centroids."
    },
    "J601": {
      "lcsc": "C5417011",
      "native": [
        89.42,
        20.05,
        180
      ],
      "delta": [
        -0.8,
        0,
        180
      ],
      "expected": [
        88.62,
        20.05,
        0
      ],
      "basis": "All ten numbered catalog pads and both locating holes match native component-local coordinates after +0.8mm X translation. Bottom-view X reflection makes the CPL origin correction -0.8mm. Catalog fac09934403f4310b3853998f3c08281."
    },
    "U601": {
      "lcsc": "C633309",
      "native": [
        85,
        60.7,
        180
      ],
      "delta": [
        0,
        0,
        180
      ],
      "expected": [
        85,
        60.7,
        0
      ],
      "basis": "Catalog f2fbfd87e0e64900805e04b89a8ad51e pin 1 is upper left in component-side view. Corrected preview pin-1 dot agrees with native triangle; previous raw export placed it lower right."
    }
  },
  "unchangedPolarizedChecks": {
    "D302": "C2297 catalog pad 1 is on the right at zero rotation, unlike the native local pad-1 baseline; existing exported 0deg gives the correct bottom-view cathode orientation. No blanket bottom-side rotation rule applied.",
    "U701": "Top-side regulator orientation unchanged; pin 1 lower left agrees with its native footprint.",
    "D301": "Bidirectional TVS; no polarity-dependent 180deg change required."
  },
  "uploadedCsvPreviewChecked": false,
  "previousBoardSha256": "bcd38b64cffab4e5818576532d2e51f45df37868f67307751ea5a2ff7a105df8",
  "reviewStatus": "review_required",
  "historicalPreview": "manufacturing/history/0.0.7-preview/",
  "serviceCompatibility": {
    "audit": "serviceability-audit.json",
    "auditSha256": "9a27d17bb5ef29364b66c1cb008442e64c8f58343f7954c3e8b01bf399560425"
  }
}